Quality auto ignition coil manufacturer right now? What is the reason? Here are some of them: The power supply voltage is unstable; The resistance of the high-voltage line is abnormal, replace the high-voltage line; There is a short circuit phenomenon in the secondary; The primary current of the ignition controller is too high, causing the ignition coil to overheat; Problems with high temperature and high-pressure wave work well; It is very unlikely that the coil itself is a problem, you can try another brand; The integrated block of the igniter does not work well. Discover additional information at ignition coil manufacturers. Haiyan ignition coil manufacturer has many offices in other countries. One of the larger productive enterprises.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
The Kettering ignition system became virtually the only type of ignition system for mass-produced petrol cars, and stayed that way until electronically switched and controlled ignition systems started to replace mechanical ignition systems during the 1970s and 1980s. The basic principle of an ignition coil: To produce the required high voltages, ignition coils make use of the relationships that exist between electricity and magnetism. When an electric current flows through an electrical conductor such as a coil of wire, it creates a magnetic field around the coil (Figure 2). The magnetic field (or, more precisely, magnetic flux) is effectively a store of energy, which can then be converted back into electricity.
Haiyan wholesale tool chest and tool trolley manufacturer has been focusing on the business of tool trolleys since its inception. wholesale tool chest manufactured by Haiyan includes multiple types. And the products shown below belong to this type. Haiyan tool cabinet manufacturer provides diversified choices for customers. Tool trolley is available in a wide range of types and styles, in good quality and in a reasonable price. Hardware accessories or Auto parts is a kind of product that is composed of every unit of the whole automobile and serves the automobile. There are many kinds of auto parts. With the improvement of people’s living standards, people’s consumption of auto parts is increasing, and the market of auto parts is becoming larger and larger. In recent years, auto parts manufacturers and hardware accessories manufacturer are also developing rapidly. Discover additional details at https://www.hj-auto.com/.
Haiyan car ignition coil suppliers have 200 workers, around 170 work over 4 years, with an independent long-term workflow and productivity, have one department including 30 products technology development and research. Our automotive ignition coil manufacturers cover over 14000 square meters, have been awarded city contracts and keeping promises to units, also we certify ISO9001, and TS16949 for a quality system, truly achieving the quality first, reputation first quality service for our customers at home and abroad. Kindly welcome domestic and overseas patrons to come and guide.