Premium altitude control valve manufacturer and supplier: How to Set an Altitude Valve? Setting an altitude valve correctly is crucial to ensure proper water flow and pressure regulation in a system. Here are some steps to guide you on how to set an altitude valve: Familiarize yourself with the manufacturer’s instructions: Each altitude valve may have specific guidelines for setting it up. Make sure you read and understand these instructions thoroughly before proceeding. Determine the desired water level: Based on your system’s requirements, identify the ideal water level at which you want the altitude valve to maintain. This will depend on factors such as building height and water usage. Adjust the pilot control settings: Altitude valves typically have a pilot control that regulates their operation. Use the appropriate tools to adjust this control according to your desired water level. See even more info at altitude valve.
Solenoid control valve is an on-off control valve that either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a main valve and a two-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energized solenoid to open) or normally closed (energized solenoid to open). Liquid level control can be provided by using a float switch or electrode probe which sends an electrical signal to open or close the valve as needed. As one of the best solenoid control valve manufacturers, industrial uses for our automatic solenoid valve are many and include accurate control of process water for batching, mixing, washing, blending or other on-off type uses.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.
GV-Resilient seated gate valve is a soft seal disc which is fully encapsulated with rubber. The valve is designed with new technology for light operating, no clogging and no corrosion, good resilient memory & long service life. It can be used extensively in all kinds of water supply & sewage, fire-fighting and function as a shut-off or regulating valve. Features: Newly advanced design, less operation torgue & abrasion resistance; Body & Cover are made of high grade Ductile Iron; Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torgue and smooth during operation; Forged stem provide stronger stem operation and less moving parts; Disc is covered by high-grade rubber which complies with drinking water; High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting; The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassambling of valve from mainline pipes; Both inside & outside are coated with epoxy resin powder; Manufacturing standard meets BS EN 1074, BS 5163, BS EN 1171; F/F (Face to Face) meets the following standard: BS EN558-1. Read even more information at https://www.shsuotevalve.com/.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
The automatic control valve is an essential component for optimising system performance. The S900 series of automatic control valves are Basic valves to provide hydraulically driven solutions to pressure, flow and level control applications. We are an automatic control valve manufacturer & hydraulic control valve supplier since 2004, all of our industrial Automatic Control Valves have passed a series of international quality assurance systems and product safety certifications. Features: Top and seat ring guided stem and diaphragm assembly for long life and reliability. All iron components are fusion epoxy bonded for corrosion resistance. Easy maintance without removal from the main line. Nylon reinforced diaphragm for long time service. Drip tight shut off. Globe design for superior control characteristics. Meet standards BS EN 1074-5, ISO 5208. BS EN 12266-1, BS EN 558-1.