Septic inspections firm in Valley Springs, CA? First we need to explain the reason for pumping the septic tank or tanks. The normal riding level of waste water in a tank is approximately 4 feet deep, with a floating scum layer and a bottom solids layer. If a tank is not pumped prior to inspection, a proper visual inspection cannot be performed as no one can see through 4 feet of waste water. The tank floor & sidewalls, the tank center seam/seal, the tank baffle and the complete inlet/outlet sanitary tees are not visible for inspection and system evaluation without pumping the tank first.
Never drain your pool or hot tub water into your septic tank system. Chlorine from your pool or hot tub can break down the important solid-busting bacteria in your system, just like household chemicals can. Additionally, adding a large influx of water into your septic tank can cause your drain field to flood. Perform an inspection of your septic tank on a regular basis. The frequency of a septic tank inspection depends on the manufacturer – it can range from three months to three years. Some septic tanks can be inspected by the consumer while others need to be inspected by a technician. In any case, be sure to have your septic tank system evaluated on a frequent basis to catch any minor repairs before they become costly ones.
If you are a customer experiencing an issue with any component of your septic system, we ask that you please contact us to alert us of the status of your system, however seek recommendations from a professional septic company for options to extend its life. To get started on a diagnosis of the status of your system, we suggest: Where is your septic tank located? Where is your drain field? Where are the inlet and outlet connections? Where are the portholes or manholes that provide access to the inside of the tank? Some of this information may be obtained by a professional septic service provider, however for a layout of your system, you should contact the Department. Your home’s “as-built” drawings may also show its location.
There are several different types of septic systems in use today. The characteristics of your property determined what type of septic system was installed. The soil conditions; such as absorption rate, type of soil and how much soil is present, were a major factor in deciding what type of system was installed. In addition, the water table level and the grade elevations of the property also played a role in that decision. Knowing what type of septic system you have, as well as it’s location is an important part in your responsibility to keep the septic system running efficiently and effectively. Following the “Septic Dos & Don’ts and performing the “Maintenance and Pumping” at the appropriate intervals, will reduce the chances of septic system failure which can be very costly. Discover more information on kinds of septic systems.
Don’t build any structures on top of the drain field. Drain fields work because of evaporation. Any structures, including raised decking, will inhibit the rate of evaporation and slow or even stop the process. Don’t allow excess water to enter the drain field. Runoff from roof drains, sump pumps, and other rainwater drainage systems should be directed away from the drain field. Excess water in the drain field can slow down and even stop the wastewater treatment process. If your septic system is giving off an unpleasant odor or you see visible sewage in the drain field, you’ll know right away there is a septic problem. However, there are a few other signs that many people don’t immediately recognize as a problem.
We at Foothill Sanitary and Foothill Portable’s “Stand” for our Flag and kneel for our fallen. My family has a very strong military background with family members serving in every branch of the military. This is why we at Foothill Sanitary and Foothill Portable’s offer a 5% Military discount to all of our vet’s as a small way to say Thank you for “your” service. My motto is from the branch that I served in “Semper Fidelis” meaning always faithful, a motto that we will bring to you.
Slower percolation rates due to poorly draining soil with clay, bedrock, high ground water, proximity to a creek, or other complications require larger leach fields. There are two methods of calculating the minimum absorption area for a leach field. Traditionally, you dig an eight foot deep test inspection hole in the area of the intended leach field to allow building inspector, or your local engineer, to physically examine the soil and determine its Long Term Acceptance Rate. Or you can have a local soil testing firm perform a percolation test to clock the speed of your soil’s capacity to absorb liquids. Discover additional information on https://www.foothillsanitary.com/.