Quality centrifuge separator manufacturer and supplier: Hybrid drive system. The use of a drive system with a frequency converter allows for stepless adjustment of the drum speed during operation, and the spiral differential speed also changes accordingly with the drum speed. When the machine is shut down, different speeds can also be achieved by swapping different sets of pulleys. The use of a hydraulic drive system to drive the screw allows for stepless adjustment of the differential speed during operation, and the hydraulic oil directly corresponds to the torque of the screw drive, that is, it is proportional to the material settling inside the rotary drum. This interconnection system is a closed-loop control system that can independently control the spiral differential speed according to the requirements of solid conveying settling inside the rotary drum. If the torque increases, the differential speed of the spiral also increases proportionally, while the speed of the rotary drum can remain constant (thereby keeping the solid dryness discharged from the rotary drum constant). Discover more info on dewatering centrifuge manufacturers.
The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.
What are the uses of a decanter centrifuge? Apparently, decanter centrifuge manufacturers are shocked by how far we can go with supplying them with high-quality parts that are hollow and uniform. Superior decanter components are centrifugally cast with high-grade stainless steel, which resists corrosion, contamination, and high maintenance. Unlike other metals, centrifugally cast stainless steel features an even, defect-free grain, with no porosity to block leaks. Centrifugal casting decanter parts are typically high-strength, long-lasting, and highly reliable. Centrifugal casting decanter centrifuge parts have apparent advantages over forgings and welded sleeves.
The full name of the decanter centrifuge is the horizontal screw decanter centrifuge, which is a widely used equipment in the field of industrial solid-liquid separation. According to the characteristics of different materials in different industries, Decanter centrifuge is divided into dewatering, separation, and clarifying decanter centrifuge. With centripetal pump technology, decanter centrifuge can also realize the 3-phase separation of liquid, liquid, and solids or two liquid phase separation. Decanter centrifuge can separate over 50%(v/v) solids from liquids on a continuous basis.Typical industrial decanter applications include Crude oil tank bottoms ,waste oil industrial,wastewater,sludge Decantering,Fish meal,WVO/UVO Desludging,Paint sludge ,Etc. If you are looking for a decanter centrifuge manufacturer, Shenzhou Machinery is your best choice. See additional information on https://www.lnszjx.com/.
Shenzhou Machinery is a subsidiary of Shenzhou Group.Which was established in 1980,conveying an area of 80000M2 ,there are 2500 staffs and employee in our company.200 of them are technicians and engineers.It has obtained the approvals and certifications of both CE and ISO. Some of our machines gained the new technology invent patent.We are on of the world’s leading manufacturers of decanter centrifuge,disc centrifuge,tubular centrifuge,separation systems and drying equipment.Now there are over 180 series or decanter centrifuges and disc separators used home and abroad.Including U.S.A , Canada ,Australia,Russia ,Brazil,Singapore and so on totally 70 countries.
The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.