Induction furnace supplier from cmheat.com? The eddy currents flowing through the resistance of the material heat it by Joule heating. In ferromagnetic (and ferrimagnetic) materials like iron, heat may also be generated by magnetic hysteresis losses. The frequency of current used depends on the object size, material type, coupling (between the work coil and the object to be heated) and the penetration depth.
It’s a common misconception that induction heaters don’t work for aluminum and other non-ferrous metals. This is not true. This induction heater will heat up aluminum and copper just fine, but not as fast as ferrous metals. This is mainly due to their lower resistivity. The higher the resistivity of the conductive material, the more it generates heat when current is passed through it. The higher resistivity of most ferrous metals coupled with the heating due to hysteresis makes them ideal for induction heating, but they are not the only metals affected by induction.
MYF melting furnace is designed for Non-ferrous metal melting. Which is used for copper, aluminum, zinc, tin and lead melting. The induction power is 40KW-600KW. The induction heating power and melting furnace are equipped with water cooling system. The air cooling ones will need customization. The graphite crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT aluminum. The input power is 3 x 380V, 50/60HZ. Air cooling or water cooling induction melting furnace. More saving for the electrical power. Easy to operate and more stable for 24 hours working. Discover additional details at pwht machine.
The use of my wire choice is quite important here. I used what is known as Litz wire. Litz wire consists of many individually insulated wires. It is the preferred wire for use in high frequency application due to the skin effect. The skin effect is the tendency of current to flow on the outside of a conductor at high frequencies. The higher the frequency, the shallower the skin depth will be. Using Litz wire will result in much more efficient working coils for your system. Not only does it transfer the energy more efficiently, it also generates less heat of its own. If you have 10amps flowing through 260 strand Litz wire, that’s only 38mA of current in each wire. 10amps through a single conductor will generate substantial heat depending on the size. If you do not want to use Litz wire, the next best thing is copper tubing. It has more surface area for the current to flow so it is more efficient than an equivalently sized solid core wire.
Shuimu, the professional induction heating equipment manufacturer, is dedicated to meeting customers’ needs. We effectively take their actual condition into account. We provide professional and efficient OEM/ODM services. The induction weld preheating PWHT machine is air cooling with DSP + PLC control. Can set the heating temperature, heating speed and cooling speed. MYF Melting Furnace is designed for Non-ferrous Metal Melting. Find even more details at https://www.cmheat.com/.