Author: Marie Poppins

3 welding equipment advices: how to become a better welder and how to select the top welding equipment. TIG Torch angle should only be around 10 degrees or less: Ideally, torch angle should only be around 10 degrees or less. Too much torch angle will deflect the heat and melt the rod before you ever get it into the puddle. This causes the rod to ball up and blob into the puddle. That’s bad. You don’t want that. You want to slip the filler rod into the puddle so that you can get a consistent bead. There are exceptions to this…like when you are using a lay wire technique and leaning the torch back while you walk the cup. But if you are dipping the rod in the puddle, too much torch angle usually is not a good thing.

Extend your Tungsten Electrode out Far enough but not too: Too short of a tungsten stickout from the cup will not let you hold a close enough arc length and will not let you see the tip of your electrode. You need to be able to see the tip of the electrode without getting a kink in your neck in order to keep your arc length right. Some textbooks are just plain wack when they only recommend extending your electrode one tungsten diameter past the end of the TIG cup. Holding too long an arc will not pinpoint the heat well enough and will let your rod ball up and blob into the weld.. but we already covered that didn’t we? I remember a consulting gig once where the welder at the aluminum body truck repair shop could not get the aluminum socket weld to puddle. The only thing wrong was that the electrode was recessed back in the cup. Once I extended it out about 3/8″, Everything was fine. ( I also talked them into getting some helium argon mix.)

Just about everyone who tries TIG welding feels challenged at first. This is understandable, given all the things you have to watch for and think about, while simultaneously coordinating the motion of both hands. In most cases, a foot pedal or torch-mounted amperage control will be used — for starting, modulating and stopping the flow of current. I have coached many people as they learn these skills, and I have received my share of questions over the years. Here are a few frequently asked questions — and answers — that should be helpful, particularly for beginning and intermediate welders.

Searching for the best Welding Equipment? We recommend Welding Supplies Direct & Associate company TWS Direct Ltd is an online distributor of a wide range of welding supplies, welding equipment and welding machines. We supply Plasma Cutters, MIG, TIG, ARC Welding Machines and support consumables to the UK, Ireland and Europe.

For the best control of your weld bead, keep the wire directed at the leading edge of the weld pool. When welding out of position (vertical, horizontal or overhead welding), keep the weld pool small for best weld bead control, and use the smallest wire diameter size you can. A bead that is too tall and skinny indicates a lack of heat into the weld joint or too fast of travel speed. Conversely, if the bead is flat and wide, the weld parameters are too hot or you are welding too slowly. Ideally, the weld should have a slight crown that just touches the metal around it. Keep in mind that a push technique preheats the metal, which means this is best used with thinner metals like aluminum. On the other hand, if you pull solid wire, it flattens the weld out and puts a lot of heat into the metal. Finally, always store and handle your filler metals properly. Keep product in a dry, clean place — moisture can damage wire and lead to costly weld defects, such as hydrogen-induced cracking. Also, always use gloves when handling wires to prevent moisture or dirt from your hands settling on the surface. When not in use, protect spools of wire by covering them on the wire feeder, or better yet, remove the spool and place it in a clean plastic bag, closing it securely.

Bobbleheads are hilarious, amazing looking and perfect items to be collected. How are bobbleheads made? There are all types of bobble heads and they’re made from several types of materials. Generally, the most common bobble heads are made from resin and plastic. There are also ceramic and wooden bobble heads, but they are in the minority of the products currently produced. The resin bobble head dolls are solid and generally allow for greater details and finer contouring of the body. Plastic bobble heads are cast from a mold, but not all plastic bobbing heads are the same. Some styles rely purely on the mold as the entire product with the appropriate paint colors added. Our most popular bobble heads use a plastic inner shell that are not solid and are covered with felt cloth. The felt adds a layer of detail, a layer of feeling, and an additional layer of strength to the bobble head. With our bobble head animals, you’ll find that the eyes are made of plastic and some vary from completely solid colors to an eye complete with color and pupil.

Let’s start with a short history of bobbleheads. 2015: A 1961-62 New York Yankees Oversized (14″) Promotional Nodder sold at auction by for $59,750. It was one of only two known in existence. According to John Brey of “The Nodder Exchange,” this was “the most desirable nodder in the hobby, bar none.” It’s a truth that endures regardless of your personal team affiliation, and it’s likely due to the fact that the Bronx Bombers claimed the World Championship during both potential years of production that the uniform was chosen. While five or fewer promotional nodders exist for each of the NFL teams of the era, only the Yankees model is believed to have been produced to represent our National Pastime. And today, just two of those are known to survive. Read extra info at personalized bobblehead.

Bobblehead is a collectable doll which has characteristically oversized head that is connected to the body with spring or wire and when the head is lightly tapped it would bobble from which doll got its name. Some of the alternative names are bobble heads, Thanjavur thalayatti bommai, bobble head dolls, Tanjore head-shaking doll, bobbing heads, moving heads, nodders, nodding heads, akabeko, wobblers and nodding heads.

The modern bobble head doll typically consists of two styles of body mold: A plastic body or ceramic body. The advent of the plastic mold over the past three decades allows for more unique designs and lightweight body styles. The time tested ceramic bobble head doll remains popular, but is more delicate in nature. There are generally two subsets of design of the plastic bobble heads doll. One style is a durable, sturdy plastic mold. The second is not only sturdy, but also covered in a “flocked” material, which is generally a cloth, fuzz material.

When it comes to collecting bobbleheads, there are few terms that are important to know when shopping or researching online: Retail – This means that the bobblehead can be purchased in a traditional brick-and-mortar store or at established online sites. These are mainly distinguished by the brand and theme of the set. This usually makes them the easiest to find, but limited edition versions go quickly.

All of our body models, change bobblehead pose and outfit are for free. if you need any change on your bobblehead, please tell us your request, we would custom the bobblehead as per your request. this is the difference between us and other suppliers.

Abobolehead has been set up since 2006.5, till now we have 11 years making bobblehead experience. Our company specialized in custom bobblehead. During 2008-2014 we mainly produce the bobbleheads for the agents. Because of the requirement of production, we need to open the retail line. So you can buy the bobblehead from our company directly, No third party sales, so the price will be lower, welcome to place the order. See extra info on custom bobbleheads online shop. It’s easy to place an order, Our website simplifies the order process. You just need to provide a few pictures to customize the bobbleheads you want, and the order process is completed in three steps. In addition, You can also choose the more features to order according to your idea.

What can you see in New Zealand and eTA application : Rudyard Kipling called Milford Sound the “eighth wonder of the world,” and if you visit this region of New Zealand, you’ll see why. Formed by glaciers during the Ice Age, the landscape around Milford Sound still bears evidence of its creation in the form of epic scenery: Cliffs rise from fjords crowned by mountains and waterfalls. The best way to see Milford Sound is via boat. Take a sightseeing cruise on the fjord to see waterfalls and wildlife such as dolphins and penguins. Or navigate the waters under your own steam on a kayaking tour. Once you’ve experienced the water from the surface, go underneath with a visit to the Milford Discovery Centre and Underwater Observatory. This is the only floating, underwater observatory in New Zealand, and visitors can go more than 30 feet deep (while staying dry) and get 360 degrees of the underwater environment.

Extending to almost the entire length of the South Island, the Southern Alps mountain range is the highest in Australasia. It is home to Aoraki/Mount Cook, Mt Aspiring, Mount Tutoko, along with various other mountains, glacial lakes and forested wonders. Located on New Zealand’s Hauraki Gulf, Tiritiri Matangi Island is an incredible wildlife sanctuary that’s home to various native and coastal birds. It is a predator-free island, where a number of threatened and endangered species have been introduced and protected from extinction.

Kaikoura, This small coastal town on the South Island is a haven for seafood lovers. You can spot fur seals, dolphins, sperm whales and albatrosses off the shore, then indulge in a feast of fresh crayfish, mussels, blue cod and more. Land lovers can take a wilderness walk through the untamed and dramatic Kaikoura forest. Franz Josef glacier, This glacier, located within Westland National Park in the southwest, is one of the world’s most accessible. Visitors can walk right up to the foot of the massive glacier or take a helicopter ride over the dazzling Ice Age remnant. Together with Fox Glacier it is one of South Westland’s major drawcards for tourists.

Who can apply for NZ eTA application? Citizens from eTA New Zealand eligible countries can obtain an eTA for New Zealand (NZ) by completing a simple online application form. The New Zealand eTA (NZ eTA) visa is valid for a period of 2 years and can be used for multiple visits. Applicants can apply for NZ eTA from their mobile, tablet, PC or computer and receive it in their email inbox by using this New Zealand eTA application form. See more details at New Zealand eTA.

All the follow up of the application is managed by our experts, and approved eTA documents are sent by email with detailed information and tips on how to use the eTa in order to successfully enter the destination country. We are a private website and are not affiliated with the New Zealand Government. Our services have a fee for our professional travel support. Applicants may process their application directly through the New Zealand Government website for a lesser fees.

A World Heritage Site, Fiordland National Park protects some of the most spectacular scenery in the country. Glaciers sculpted this dramatic landscape carving the famous fjords of Milford, Dusky, and Doubtful Sounds. Visitors here can explore gushing cascades, offshore islands, virgin rainforests, vast lakes, and craggy mountain peaks. Not surprisingly, the park is a haven for hikers with some of the country’s best walks, including the famous Milford Track. Sea kayaking is a popular way to explore the fjords, and visitors can also enjoy a scenic flight over the park for a bird’s eye view of its staggering beauty.