Author: Amelia Whitehart

Who is Gerry Bryceland and some of his portret painting thoughts

The rise of an artist : Gerry Bryceland? If you are going to try to execute a highly detailed self-portrait, the prep work you do before putting pencil to paper is very important. Art may be spontaneous and creative, but there are times when you have to take a more methodical approach. When your goal is to draw a highly detailed self-portrait, this is one of those times. Start out by getting your lighting set up. Good lighting can mean the difference between a boring looking portrait and a fantastic looking portrait. Try something different here, set up dynamic lighting that illuminates one half of your face and not the other. Or have a strong light source that comes from above that casts shadows under your nose and neck, and darkens your eyes. What you are going for is something out of the ordinary that will give your self-portrait a unique and exciting look.

Drawing The Nose: From the inner corners of your eyes, draw two straight lines going down up to the third red guide line, it’s also the level of where the bottom of your ears are. These are the marking points for your nose. Begin drawing the nose while being careful to stay within those lines! The tip of the noise is usually rounded, so once you reach that point, draw a very light circle to serve as a shaping guide. Sketch two small oblongs with tips tapering (almost like teardrops but curved) towards the center very lightly under the tip of your nose on both sides. These will be the nostrils. Pay close attention to the size and shape of your nostrils, make sure that the holes you draw are not too big nor too small. Unless of course that is what you can clearly observe on your model or reference. When not done carefully, it could ruin the proportion of your portrait drawing.

Gerry Bryceland‘s guides on portret painting: The hair is the last element of the face to be painted. The painting of the hair is usually the last part of the head to be completed. It follows the natural order of the painting, finally covering the rough edges of both the background and the skin. The colors used for the dark areas of the hair were ivory black and Prussian blue, while the highlights were mostly titanium white. You can see the technique used for painting the hair in our close-up detail. The underpainting was applied with freely brushed glazes of ivory black and Prussian blue. The overpainted details of the hair were built up with fine strokes of black and white whose direction follows the contours of the haircut. The opacity of these brushstrokes was varied to suggest the depth, texture and highlights of the hair. The density of the brushstrokes decreases around the edges of the hair to convey softness of its outline.

Self-Portrait Drawing Tips: Don’t obsess over creating a perfect likeness of yourself. As an artist, you should be working to express yourself, and that expression includes drawing what you feel as much as what you see. If you want a perfect copy of your face, you can take a picture for that. If you want an intriguing and thought-provoking self-portrait, then worry more about the mood of the piece rather than trying to create a photo-realistic drawing. Color can be your friend. Whoever said that a self-portrait has to be black and white? You could draw your self-portrait in graphite or charcoal, or you could be more adventurous and try colored pencils, pastels, or oil pastels. Or, you could really step your game up and try painting a self-portrait with watercolors, gouache, acrylics, or oils.

About Gerard Bryceland: I’m Gerard Bryceland an artist based in Maidstone Kent and regularly get commissioned to do work doing paintings and portraits of people and their families. I’ve always been an artist from my childhood, I loved drawing my friends and family initially just to mess around with my friends and had a lot of fun drawing them. But as i got older it really just became a business as my friends and their families would want me to do family portraits and that type of thing. With word of mouth word gets out and before you know it you know it I’m 35 and still doing the same thing.

By Arts

All auto hail repair processes today

Automotive hail repair tips today: What is paintless dent repair? Auto technicians use paintless dent repair (PDR) to make the process totally painless. By accessing the damaged area of the vehicle from beneath the dent, the exterior can be pushed back into its former shape. So long as the technician can access the underside of the body panel, this technique is a viable option. Paintless dent repair actually involves a few techniques. In some cases, specialty tools use suction to pull the dented area back into shape. The auto body repair technician uses tools to access the vehicle’s steel or aluminum paneling. After getting into the car’s paneling, the technician can repair the dents on the vehicle without the need to match the vehicle’s paint and thus sparing the customer from an expensive paint job. In other cases, a customer may want to get their car painted, but dents need to be removed first to create a smooth surface area. No matter the reason, paintless dent removal saves customers time and money.

PDR technicians require a large arsenal of tools to successfully complete a job. “Pro” kits include various shape and length rods, wire tools, door hooks, window tools, black beauties, whale tails, flat bars and tweakers. Additionally, it is common to see technicians use light readers for accurate dent readings, LED lamps, and glue pulling kits. Every job requires multiple tools, and it is not the same for each individual case. However, the most common tool is the long metal rods used to gently push the metal back into place. These tools can be expensive, and the average car drivers are much better off paying for the service than buying their own set.

The PDR techniques are applied using three different procedures, depending on their suitability for each particular case: Using metal rods to exert the necessary pressure from the inside out to remove the dent. Utilising hot-melt adhesives that make it possible to work from the outside when the characteristics of the panel or its damage make the use of rods unadvisable or impossible. Applying controlled heat through magnetic induction, a technique developed to restore the original strength of the steel that has been weakened by hard impacts. Thus, the panel recovers its rigidity through controlled changes in the temperature of the affected spot.

Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. The glue-pull PDR is a technique used on dents and dings. It involves using specialized glue to attach a tool or suction cup to the dented part of the surface and then pulling or twisting another tool to pull it out. When you’re looking for the best paintless dent repair tools, consider this method because most kits are sold all-in-one with everything you need to make your car’s exterior look new again. This method doesn’t damage your car paint, doesn’t require strenuous effort, and is environmentally-friendly. The PDR process is requires patience and a trained eye to see the tiny changes made during each use of a tool. During the repair process it is often required to cycle through each of the previous steps until the dent has been completely removed.

The bottom line: PDR is an excellent choice for repairing hail damage, but it may not be the right option for you. If your car has severe damage, you’ll most likely need to have a trusted body shop repair the vehicle with body filler. Be sure to shop around to get an estimate on the cost of repair. The ins and outs of insurance: Does insurance cover hail damage? It should if you have the right coverage. If you have comprehensive insurance, your insurer should cover the repairs if you’ve met your deductible. Hail and similar damage from natural causes is typically categorized as an “act of God.” Since the situation is out of your control, you’re not responsible for paying for the damage.

$0, You Pay Nothing No Deductible. $0 out of pocket repair on all auto hail insurance claims. FREE vehicle hail damage inspection. Guaranteed! All Insurance Accepted We work with your insurance company from the moment you drop off to pick up, making the repair process hassle free. Don’t let insurance deductibles get in your way from repairing your hail damaged vehicle! We pay your deductible so everyone with coverage can get back on the road with $0 out of pocket. Guaranteed. Read even more info on Auto repair hail services Colorado Springs, CO.

Getting a dent in your car is one of the certainties in life. Even if you’re the most careful driver, you don’t always have control over out-of-nowhere light posts, runaway shopping carts, misthrown footballs, and so many other things that could hit your car. Minor dings and dents in your vehicle could lead to bigger problems if neglected. When taking your car to an auto body shop, ask them if they perform paintless dent repair. Most experts recommend this method compared to the traditional way of fixing dents because it’s faster and more affordable for customers.

By Automotive

Renault premium second hand vehicles for sale by car trader Reading right now

Opel premium second hand vehicles for sale by car trader Reading, UK 2021? When you are considering used car sales Reading, you can think about saving a lot by investing much lesser amount for the vehicle. The prices are obviously low for used cars and the dealers also do give a low rate of interest. Hence, this is an excellent option if you are looking to get a great car of your choice and also save up for other things at the same time. Advantages and Disadvantages: The biggest benefit of purchasing a used car is that you allow someone else take the depreciation hit on that car. You can easily sell that car for nearly the same amount to someone else in a while. Also, your insurance rate will be much lower on a used one compared to a new one depending on the model.

Here are some things to consider when buying a car: Do you have children or want to start a family in the near future? Do you think you’ll need lots of storage space in your vehicle? Do your friends rely on you for carpooling? Is passenger room a priority? Of course, there are several other questions you should ask, but these are a few starting points. Determine whether you’d like all-wheel drive for hauling large loads. Compare fuel economy and cargo volume for your frontrunners. Most Nissan dealers will have an online inventory that lets you sort by different features like trim level, price, color, model, etc.

Affordable, reliable and quite powerful, the Soundquest Power battery is a perfect secondary battery for your audio needs. With excess of 2000 Watts, this battery will not only make your car music sound perfect (especially that bass!) but you can also say goodbye to flickering lights. The Soundquest battery uses Absorbent Glass Mat (AGM) technology, which makes it highly durable and efficient at what it does – it runs something up to a whopping 2000 Watts without causing any issues that usually come with high-powered audio (such as dimming lights). The battery actually stores energy, so there’s no need for adding a capacitor to the system to get a quick burst of energy when you need it. It holds a reserve power of 33AH and can be recharged with pretty much anything. Read even more info at car trader Reading if you need to buy a car.

Which Terrain do you recommend? The base Terrain SL gets a full suite of standard safety features this year, so it’s a bit more appealing than it once was, but we’d still recommend upgrading to the SLT trim level. The SLT is eligible for a long list of options, including the more powerful 2.0-liter turbocharged engine and creature comforts such as a heated steering wheel and a seven-speaker Bose audio system.

Spending about $20 to replace the fuel filter can save you a lot of money on a fuel filter. Most experts recommend owners change the fuel filter annually to keep it in top shape. While this is a fast and inexpensive replacement, it’s a more advanced project not recommended for DIY. A professional can take care of the fuel filter when you take the car in for maintenance.

Because most car shoppers these days keep their cars for five years or more, take your time with the test drive to make sure you really love the car. Don’t hesitate to ask for more time behind the wheel to ensure you like the driving experience, and spend time in the car while it’s parked to adjust the seats, experiment with the controls and determine whether passengers would be comfortable and your regular cargo would fit well. When you are ready to make a purchase, forget about trading in your old car for the moment. You’ll fare better if you negotiate the sale price of your new car and the trade-in value of your old car separately. Make sure you have already researched your current car’s value online so you’ll know whether you are being offered a fair price when the trade-in is discussed.

Check your windshield wipers to see if there are any fraying, cracks, hanging rubber, or bends. If so, it’s time to change your windshield wipers. Another more obvious way to determine if your wipers are still effective is to wet your window and turn them on. You can squirt your windshield washer fluid or just pour some water on the windshield. The water should wipe away easily without blotting or streaks. If streaking, use a rag and wipe away any dirt and oil from your blades and window then retry. If not wiping evenly and cleanly, have your wipers replaced. See extra information on carsalesreading.co.uk.

Automobile buying news: The Jump-N-Carry JNC660 is the best-designed jump starter on the market, featuring a heavy-duty case and a carrying handle. It offers 1,700 peak amps and 425 cranking apps, plus features extra-long, 46-inch heavy-duty #2 AWG cables. It’s also equipped with a replaceable PROFORMER battery that’s designed specifically to perform a jump-starting application. On its front, it has lights to show its built-in automatic recharging, so you’ll know when it’s fully juiced up. The unit also features a voltmeter dial that checks the status of your battery. Aside from jump-starts, it includes a 12-volt power output with automatic circuit prevention that can power a number of your accessories. Although it’s one of the heaviest portable jump starters on the list, weighing 18 pounds, it comes with a 30-day warranty.

By Automotive

Fabulous travel spots and corporate team building in Singapore

Travel attractions Singapore today and the best perfume making kits gifts? The most adrenalin-inducing thing to do in Singapore has got to be the G-Max Reverse Bungy, Singapore’s first ever bungy. Get launched skywards at 200 km per hour to a height of 60 metres and bounce for approximately 5 minutes. The experience is not unlike being an astronaut in a rocket launch as you sit in an open-sided ‘capsule’. Also, for a few extra dollars, riders get a T-shirt and a DVD recording of themselves in action, taken by an onboard camera. Built in 1894, Lau Pa Sat, once a wet market, is now a popular and atmospheric hawker centre. This historic building was built with Victorian filigree cast-iron and is located in the heart of Singapore’s business area. At lunchtime, it’s full of office workers, whereas, by night, the street is closed and the many food stalls serve plenty of local favourite dishes. Also known as Telok Ayer Market, standout dishes at Lau Pa Sat include sticks of tasty satay chicken with peanut dipping sauce and grilled stingray, covered in a spicy sambal sauce.

Scents can be given to anyone; from a young spritely adult who works at a fast food joint to your sophisticated great grand aunt that lives across the street. It is unique and special either way. Fragrances are genderless depending on the perfume’s makeup. WIth this perspective, it’s the perfect gift for the gent at work or a woman on the go. An example of an androgynous perfume brand is Jo Malone. It caters to both sexes, since the brand’s scents are very neutral and unisex.

The most adrenalin-inducing thing to do in Singapore has got to be the G-Max Reverse Bungy, Singapore’s first ever bungy. Get launched skywards at 200 km per hour to a height of 60 metres and bounce for approximately 5 minutes. The experience is not unlike being an astronaut in a rocket launch as you sit in an open-sided ‘capsule’. Also, for a few extra dollars, riders get a T-shirt and a DVD recording of themselves in action, taken by an onboard camera.

If you’ve ever visited China, Singapore’s Chinatown neighborhood will bring you right back there. From the small mom-and-pop stores and authentic Chinese food to the bright red lanterns, there’s an excitement and hustle in this district. You can visit the Chinese Heritage Centre and see the impressive and beautiful Sri Mariamman Hindu temple. Another temple worth seeing is the Buddha Tooth Relic temple. If you’re up early enough (think 4am), you can hear the morning drum ceremony. Or you can just check out the closing ceremony in the evening after viewing the relic. Heritage markers have been installed throughout the neighborhood in English, Japanese, and simplified Chinese, so visitors can better understand the significance of the area. But this neighborhood is not just a testament to the influence of the Chinese throughout Singapore’s past. This is a progressive neighborhood (with free Wi-Fi for all), and it’s home to the trendy Ann Siang Hill area, where the quaint bistros and upscale boutiques could be at home in any Western city.

Looking for something unique to bring back from Singapore? Get some unique orchid-scented perfumes and fragrances from Singapore Memories! Orchid is Singapore’s national flower and this shop uses native local orchids and therapeutic orchids in their products. Other gifts suggestion: Dining in Heavenly Wang will take you back in time and you can leave the place with a souvenir or two by purchasing tubs of their yummy biscuits from their “biscuit wall”. You can find biscuits ranging from the classic iced gems or pineapple sandwich biscuits (from SGD 2). Opening Hours/Address: You can click here for their store locations and opening hours. P.S. So many neighbourhoods to visit in Singapore that you’re spoilt for choice? Check out our guide to Singapore’s hipster neighbourhood, Tiong Bahru! Singapore’s answer to peanut butter and jelly toast is the country’s signature kaya and butter toast, which can be found in every food court or coffee shop. Ya Kun Kaya Toast specialises in traditional kaya and butter toast. The coffee shop may not be halal-certified in general, but they pride themselves for their very own kaya (and the kaya is halal-certified!) Find extra info on tourist attraction Singapore. Singapore is one of the great cities of the world, with its blend of Asian and European cultures. Founded as a British trading colony in 1819, since independence it has become one of the world’s most prosperous city states and boasts one of the world’s busiest ports. Graceful colonial buildings co-exist alongside centuries-old street markets and modern high-rises. Though the government can be strict with residents and visitors who misbehave, travelers who follow the rules can’t help but be fascinated by this multi-cultural city. An overview of the top tourist attractions in Singapore.

Join us complementary tour of the perfumery where you get to know about Singapore history and flora up close. This tour starts at fixed time, few times a day. Also, consider a self-guided Augmented Tour and Digitised perfume making experience! We often have deals with partner hotels and other Sentosa attractions. Call your concierge to find out about the available discounts. Sentosa is covered with secondary rainforest and of course houses the most amazing flora, much of which is native. It is also the place where Singapore’s only dinosaur footprint was discovered. ?Our perfumery exhibits and tours are designed to appreciate the heritage & history of perfumery in a very Singaporean context, with special focus on Orchids & Sentosa’s plants. A visit to Singapore Zoo will raise your eyebrows to see some beautiful and endangered animals dwelling inside the premises. A happy family venue to visit, Singapore Zoo is one of the best places to go as it houses more than 300 species that include Giraffes, Koalas, Zebras and White Tigers. The zoo has been divided in different zones depending on the animal’s habitat. In Frozen Tundra you can find species such as polar bears and racoon dogs, in Fragile Forest you will find a rich rainforest filled with insects and beetles as well as flying foxes to name a few. Over at Primate Kingdom, you can see Java Langurs, Lion-tailed Macaques etc. A great way to make a day as Singapore Zoo offers other attractive things to do and see as well like Splash Safari Show, Orangutan Exhibit and Jungle Breakfast.

Easy to carry and flaunt: The design of the Singapore Memories perfume gift set and the carry case is as such that it becomes convenient for anyone to use and carry it around with ease. The box holds all 7 perfume vials along with the carry case. It is made of sturdy plastic hence it can be carried around on holiday or business trips as well. The carry case is small enough to fit into the palm of your hand hence you can slip it into your pocket, handbag, or clutch bag. It is perfect to fit into your busy lifestyle. They will love this thoughtful gift. Many orchids have been found to have medicinal properties, whether used in drugs, taken due to tonic potential, or used to cure chapped skin and bleeding sores. For example, Salep, a drug made from orchids Orchis Mascula and Orchis Militaris, was once extremely popular in Turkey. It was and is used in the Turkish ice cream bastani. Salep flour was also used in desserts and beverages mainly in the Ottoman empire, and in Syria and Palestine, it is a traditional winter beverage. Another instance is dendrobium, an orchid that is taken because of its tonic potential. Dried Dendrobium is believed to possess medicinal properties that can help treat cancer, strengthen the immune system, and improve eyesight.

Singapore’s oldest nature park is continuously filled with joggers, families and weekend strollers – plus those flocking to see the occasional free concert. You can get into the reservoir’s rainforest via the MacRitchie Trail, which offers straightforward boardwalk treks and more ambitious, longer hikes. There’s plenty of wildlife here, from flying lemurs to tree frogs and pangolins – but they do tend to hide out of sight. The one exception are the long-tailed macaque monkeys that hang about. Be warned, though: having been fed by less responsible visitors, they can be aggressive little terrors.

By Travel

Top glass swing doors online shopping right now

Top swing glass door online shopping right now? Closeup of door construction shows how the various components are designed to interlock and provide energy efficiency. Sometimes a patio door is called a French door. The term “French door” usually refers to a pair of glazed patio doors that hinge at opposite sides and meet in the middle; when you open them both, they create a large entryway. Sliders and patio doors are sold as a complete system that includes the jambs, threshold, and all necessary weatherstripping. The doors interlock for energy efficiency and the hardware is designed as part of the system.

Installing a barn door and sliding hardware yourself can seem daunting, but it’s actually very easy! However, there are a few important things to keep in mind so your installation goes smoothly. Here is a list of 10 things to consider before you begin. Natural wood barn door with black hardware in a bohemian room. Measuring for a barn door is different than for a swinging door. You will need a different size for a sliding door versus a swinging door in the same size opening.

We talk a lot about securing regular doors, but what about sliding doors? You’ve got a few options to protect your exterior sliding door. You can let your deck or patio fall into such complete disrepair that it becomes a death trap for any would-be intruder. Or you can take more a socially acceptable action by using one of our tips below. Using alarm sensors tied to a home security system is an easy way to protect your sliding door. Most alarm systems come with door/window sensors (also commonly called entry sensors). When attached to a door frame, these sensors monitor open/close motions. If someone forces the door, the alarm sounds and calls for help. Read more details at see more.

Slab: This option includes just the door itself. No hardware is included, so you can mix and match doors with the hardware that fits your style. Flush barn doors are flat and smooth, while paneled barn doors feature rails and stiles that form a design. If privacy isn’t a concern, glass barn doors are a unique addition to any home. The most popular barn door material is wood, however, barn doors are also available in metal and manufactured wood. Consider your home’s style to create a cohesive design. Metal and glass doors work well in modern and contemporary homes, while wood complements traditional or rustic homes.

All our doors are made of toughened/tempered glass. Tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (annealed glass) does. The granular chunks are less likely to cause injury. Read additional info at https://glass-door.us/.

By Home

Excellent cosmetic eyelid surgery clinic in Santa Barbara

Best eyelid surgery clinic in Santa Barbara? Blepharoplasty surgery is a cosmetic eyelid procedure that is performed primarily for the purpose of being able to get rid of droopy or baggy eyelids, puffy eyes, tired eyes, aging eyes and excess skin, which is one of the most visible signs of aging. This results from the laxity of tissue, making it saggy and giving the “tired” look. Fat pads can budge from the lower eyelid and hooding from the upper eyelid can occur as well. While upper eyelid surgery can be used for cosmetic purposes, it is also beneficial in terms of correcting medical problems in the eye lids, such as when there is loose skin that can have a negative impact on your vision.

Feeling ‘frozen’ can actually feel good. If there’s one thing everyone seems to fear about Botox, it’s looking like an expressionless robot. Isn’t it freaky not to be able to move certain parts of your face? In my experience, no. The inability to knit my brows together when my husband makes a snarky comment or my kids grind couscous into the carpet has actually been a kind of relief. The faces we make carry emotional weight. You’ve probably heard that simply smiling more can make you feel happier — and it turns out that not frowning can have the same effect.

People that found it difficult to eliminate stubborn fat in certain areas of the body. Also, some other conditions like: Abdomen, thighs, necks, and arms with stubborn deposit fat don’t disappear after diet or exercise. Good skin elasticity with low excess skin; if you plan to go for surgery but don’t have any of these conditions, your overall result won’t be aesthetic. Excess skin is a contraindication for this procedure. If your main concern is cellulite, this might not be the procedure for you; other minimally-invasive treatments can be recommended to address this concern. If you want to improve your body shape but you don’t have over 20 pounds overweight.

Your face is precious after all and you will have with you for life, so before deciding on having the rhinoplasty procedure, you should definitely weigh your options, do your due diligence and be sure to ask your plastic surgeon plenty of questions to determine if this surgery is right for you. Your nose is the center of symmetry in your face and even subtle alternations can dramatically change your appearance. Expectations are a critical component when selecting candidacy. The best candidates have a desire to enhance the profile of the nose, but there is not a perfection obsession. The ideal candidate is a person who does not seek a rhinoplasty to make them a happy person, as they are already happy with their daily life and are simply seeking an enhancement to self-confidence and self-esteem. It’s important to be realistic in terms of goals for your rhinoplasty results and it is critical to discuss all of your expectations and concerns with Dr. Sheffield to ensure that the outcome is in line with the surgical possibilities.

Lip enhancement covers a wide range of procedures that bring about a restoration of the natural curves of the lips or helps to accent an already existing curve. This aesthetic procedure also covers enhancement of the Cupid’s bow. Aside from enhancing the symmetric of the lip, this procedure also caters to individuals who may want a stronger definition, perhaps a more defined vermilion border. The lip enhancement procedure can be of help to individuals whose gums become visible when they smile or those with uneven lips. This procedure can be temporary or permanent depending on the procedure. For temporary lip enhancement, patients would need repeated treatments. This cosmetic procedure tends to be carried out more on the upper lip than the lower lip. To determine the best approach to employ, an experienced plastic surgeon will consider your entire face, not only your lips. A good enhancement procedure will blend with your natural look and not stand out, thus overpowering your face. Discover extra details at https://sbaesthetics.com/upper-blepharoplasty/.

Understandably, our physical appearance can be a hard thing to discuss, but at Cosmetic Avenue, our team is there to listen attentively with one objective in mind; giving you the best possible experience and outcome. Some medication increases bleeding such as Aspirin and Ibuprofen; you must avoid these drugs two weeks before, and after your surgery. Your doctor will give you any necessary prescribed medication and instructions on how and when to take them.

For those considering this treatment, it is important you have proper knowledge of the attendant risks and benefits of the available procedures. Lip fillers have the advantage of being temporal and less invasive. This way, the patient can know how their lips will appear after treatment before they opt for a more permanent procedure. Below are some of the other reasons why lip fillers are a better choice; It creates a faster result. In one or two weeks following the lip injections, the swelling or bruising will have disappeared allowing you to see how your lips will look for the next few months. It is apt for people who are not sure of how much augmentation they want It is the best alternative to surgery.

Dr. Robert Sheffield, the Med Spa Director issues an important warning. He cautions those who take Accutane, have severe acne or chronic rosacea to avoid these facials and consult with their chosen dermatologist first. Women who are pregnant, patients who are on blood thinners, and those who are experiencing any sort of heart condition should steer clear of photorejuvenation (IPL) and microcurrent therapy. Both of these components are typically included in medical facials. Discuss any skin sensitivities or allergies with your chosen aesthetician or cosmetic doctor before beginning treatment. Several different schools are available for further education and a practical exam/state administered written exam must be passed for licensing purposes.

Lines around the eyes, or crow’s feet. These are common with aging. They are the small lines that extend out from the outer corners of your eyes. These appear as a natural result of smiling or squinting. When injectiing Botox in the crow’s feet, the amount typically ranges 5-20 units for women and 15 – 30 units for men. At SB Aesthetics, we take a natural approach to facial rejuvenation in the eye region. It’s important to still have a natural look in line with the aging process and expression while at the same time restoring the youthfulness. Botox will help the crow’s feet by reducing the wrinkles and creases and help prevent them from becoming worse over time. Always use an experienced plastic surgeon in order to ensure the best results.

Rhinoplasty is a small risk for heart patients, but it should be considered. If you are worried about your rhinoplasty and are afraid of the risks after surgery; All you have to do is talk to your cosmetic surgeon about your concerns and desires. Fortunately, rhinoplasty has far fewer risks than other surgeries, and its complications are very rare. It is often done completely without any side effects. There is no need to worry if you are careful in choosing your surgeon and get enough information about rhinoplasty. Because choosing the right ENT surgeon will help you make sure they take the most preventive measures for you.

Dr. Sheffield will explain his techniques to the patient and lets them know about the type of anesthesia he will use. The location and type of facility is also covered. The patient is given the chance to learn about the costs and risks involved. This is the perfect time to ask any questions about the procedure as well. Here are the visible signs of aging that may say it’s time for a short scar facelift procedure: Nasolabial folds, jowls or marionette lines are present, There is an appearance of a double chin, There are deep creases and lines near and around your eyes and forehead, You have a saggy or “turkey” neck, There is loss of volume and a hollowness in the cheek region, Your jawline is lacking the definition you want, The disappearance of volume in the features around the mouth. See additional details on https://sbaesthetics.com/.

By Health

Hookup advices and high quality dating websites in 2021

Top quality hookup websites in 2021 and dating tricks? Crossdresser Dating Site is exactly what it sounds like— a great place to meet crossdresser singles. Members can meet single crossdressers on this dating site for free. Unlike other crossdresser dating sites, this platform doesn’t charge a dime to access its basic features. A basic account will allow you to create a user profile, view profiles, and send flirts. Now, if you want to send unlimited messages and access premium features, you’ll want to set up a monthly subscription. You can create a free account and start browsing and meeting crossdressers right away. Whether you’re a crossdresser yourself or looking to meet one, you’ll have no trouble at all with this site. Best Feature: Most crossdresser dating sites are targeted towards male users. On Crossdresser Dating Site, both males and females are welcome to browse profiles and meet crossdresser singles. The site makes it easy to narrow down your specific needs whether your a gay man or a straight woman looking for a crossdressing match.

There are lots of women and men from every South American country here. This website has a very easy-to-use interface, which is a serious advantage for those who have never used international dating platforms before. Great search tools, mobile-friendliness, very detailed profiles — it makes Latin Feels is worth trying. If you are going to send emails, to chat with users, or to view their profile videos, you will need credits. You don’t need them if you are only going to browse the profiles and add people’s profiles to the Favorite list (this function is useful if you don’t want to lose someone’s account, but interact with it later).

Why should you use hookup sites to find girls? When used correctly, hookup sites make an additional source for meeting new people, so it is not even about being desperate like most people say. Below are some of the reasons you should use hookup sites to find girls: You have No Time: This is why a lot of people use hookup sites. Many people are very busy with work and many other responsibilities, and they have no time to go out and meet new people. Find even more info at lonely wife hookup.

No dating site — especially those for the marriage-minded — are completely hands-off. Every site and app requires work upfront, like filling out a profile, answering multiple choice questions to gauge your personality, and engaging in conversations with potential matches. But once you’re settled in, you may want something a little less involved. Hinge can still give you the serious results you’re looking for in a laid-back way. Here, you don’t pay for the service but you do have to be more thoughtful with your opening one-liner. Hinge forces you to comment on a photo or a profile question response, and it dings you if you aren’t replying. This is a great way to ease into the serious-dating territory, especially if your job is uber-demanding or you often forget to engage online.

Dating app Snack is marketing itself to a new generation of daters and is building excitement with $3.5 million in funding, according to Tech Crunch. The app is modeled after TikTok and Instagram, placing short form video as the centerpiece rather than profile pictures. Instead of swiping, each user has a feed they can scroll through to see what other users have posted. When you like a video, you are able to comment, and if two users like each other’s videos, then DMs open up for them to message over the app.

Xpickup is an excellent adult hookup site that provides you the opportunity to meet anybody you are interested in and set up any sexual experience. It provides a platform for communicating with someone and picking them up later to set up a date or another sexual activity. SexFinder is a hookup site designed for people looking for fun, find hot girls near you for sex with no strings attached. The site is very active, and many people use the site because it is welcoming, fun, and safe. The members are sexy and objective, depending on your needs. Read more information at https://www.hookupscout.com/.

By Entertainment

Lip augmentation doctor in Santa Barbara, CA today with lip injections recommendations

Highly recommended lip augmentation doctor in Santa Barbara, CA and lip augmentation tips? What to expect after Restylane? Healing time can vary with each person and depends on how many injections you received and where. You can expect some redness, swelling, or bruising that might take a week or so to fully resolve. You should also limit your sun exposure afterward to prevent added swelling or bruising. You can return to work soon after, although if you’ve had several injections, you might want to give yourself a day to rest and recover. Full results are usually seen within a week after the procedure but you will also see immediate effects since the products add volume when injected.

Getting Botox is not a moral failing. Because of my previously held opinions about Botox, a part of me felt that to try it would mean selling out on my principles. Plus, as a deeply religious person, I’ve always subscribed to the belief that vanity is a sin. But I’ve come to believe that the desire to look attractive (or at least not look angry) is natural and good. If I could prevent myself from frowning on my own power, I would do so! It doesn’t bother me to use a little medical help to get there.

The first step will be to infiltrate a solution made of epinephrin that will act as vasoconstrictor and lidocaine into the areas that will be treated. This will make the area tumescent (swollen). The epinephrine works, reducing the blood loss during the treatment hence dropping the risk of bruising. The next step will be to make the incisions and insert the cannulas linked to the vacuum device connected to a collection system; the cannula will be moved across the area to treat to remove the fat tissue, and no stitches are needed thanks to the incision size, these are only a few millimeters. Tylenol is indicated to manage the discomfort even if the anesthetic injected usually reduces the pain for the next 24 hours after the procedure. Ambulation is recommended as soon as possible to increase the recovery process, but exercise can be started one week after the procedure is done. Improvement will be noticeable in the new weeks, but the full result can take up to six months. A compression garment is worn usually 1-2 weeks following the procedure to aid in recovery.

Your face is precious after all and you will have with you for life, so before deciding on having the rhinoplasty procedure, you should definitely weigh your options, do your due diligence and be sure to ask your plastic surgeon plenty of questions to determine if this surgery is right for you. Your nose is the center of symmetry in your face and even subtle alternations can dramatically change your appearance. Expectations are a critical component when selecting candidacy. The best candidates have a desire to enhance the profile of the nose, but there is not a perfection obsession. The ideal candidate is a person who does not seek a rhinoplasty to make them a happy person, as they are already happy with their daily life and are simply seeking an enhancement to self-confidence and self-esteem. It’s important to be realistic in terms of goals for your rhinoplasty results and it is critical to discuss all of your expectations and concerns with Dr. Sheffield to ensure that the outcome is in line with the surgical possibilities.

Lip enhancement covers a wide range of procedures that bring about a restoration of the natural curves of the lips or helps to accent an already existing curve. This aesthetic procedure also covers enhancement of the Cupid’s bow. Aside from enhancing the symmetric of the lip, this procedure also caters to individuals who may want a stronger definition, perhaps a more defined vermilion border. The lip enhancement procedure can be of help to individuals whose gums become visible when they smile or those with uneven lips. This procedure can be temporary or permanent depending on the procedure. For temporary lip enhancement, patients would need repeated treatments. This cosmetic procedure tends to be carried out more on the upper lip than the lower lip. To determine the best approach to employ, an experienced plastic surgeon will consider your entire face, not only your lips. A good enhancement procedure will blend with your natural look and not stand out, thus overpowering your face. Discover even more details on lip injections Santa Barbara.

Understandably, our physical appearance can be a hard thing to discuss, but at Cosmetic Avenue, our team is there to listen attentively with one objective in mind; giving you the best possible experience and outcome. Some medication increases bleeding such as Aspirin and Ibuprofen; you must avoid these drugs two weeks before, and after your surgery. Your doctor will give you any necessary prescribed medication and instructions on how and when to take them.

What’s the difference between a medical facial and a spa facial? The end goal—clear, beautiful healthy skin—is the same no matter what facial you get. But a medical facial, like the ones we offer, is much more powerful than anything you can get in a spa. The main reason: we use medical-grade skincare products that contain higher concentrations of active ingredients. This gives you more dramatic results. Day spa facials and a massage facial are often geared toward a more relaxing, pampering experience with added hand and foot massages, spa music, and aromatherapy, for example. The other benefit of medical facials: you can have other concerns treated by one of Dr. Sheffield’s staff after your facial. Specialty spa facials are generally for patients 30 years and old and are used as part of the facial rejuvenation anti aging process.

Lines on neck. Your neck also can be a casualty of aging. It is common for lines to develop around the neck horizontally. Botox is a tool that can be used to minimize these lines. Sun damage, the decrease of collagen and elastin, in addition to the decreasing in strength of the underlying platysma muscle can cause horizontal neck lines which are also known as the necklace lines. Botox injections to this area are used above and below and along the length of the lines. It is common practice to be conservative for neck line injections so as to not affect the patient’s ability to swallow so the injections are given in multiple applications.

What is a septoplasty? A septoplasty is often done with a rhinoplasty and it is called a septorhinoplasty. Septorhinoplasty is an operation that corrects the inside of the nose while correcting the outside. Unfortunately, I see patients who have had rhinoplasty without a septoplasty and now can’t breathe properly. When you are evaluated, ask your doctor if there are any functional problems inside your nose so that they can be corrected at the same time. If your doctor is unable to correct them at the same time, you should probably seek another opinion.

The mini facelift under local anesthesia is customized for each individual patient. Dr. Sheffield evaluates the patient’s skin, face and underlying bone structure during the initial consultation. He will also speak with patients regarding their surgical goals and ultimately set the correct expectations. Medical conditions that could lead to complications during or after surgery are discussed as well. Patients who have blood clotting problems, high blood pressure, and excessive scarring must tell their surgeon about these issues. Medications and drug use also need to be spoken about in an open forum because of their potential effect on the procedure. Read even more information at https://sbaesthetics.com/. So, how long do lip fillers last? Most fillers last between six to eight months and most people get their lips topped up every six months to a year; it all depends one your budget and what kind of look your going for. What are lip injections made of? Collagen: Collagen is a type of protein found naturally in the body. The effects of these injections last three to four months. Hyaluronic acid: This is the type Juvederm is based on, the filler Kylie Jenner swears by. Injections using Hyaluronic acid last four to six months.

You also need to make sure that you are prepared for the after-care. You should establish a particular area in your house for your recovery. Try to choose soft food like yogurt, oatmeal, pudding, and jello. Choose a food that will not require you to do excessive chewing. How Long Is the Recovery? When you are going get a lip enhancement procedure, it is essential that you will have someone to assist you in driving after the procedure. In case you are going for a surgical implant, the entire recovery may last up to 2 weeks. With other lip augmentation procedures, there is virtually no downtime, and you can possibly return to work immediately. Recovery is very simple, with no downtime and minor side effects. After the procedure, bruising and swelling may appear which could last almost two weeks. For faster recovery and to reduce swelling, patients can follow these tips;

By Health

Facial rejuvenation and medical spa clinic in Santa Barbara today

Facial rejuvenation and medical spa services in Santa Barbara, CA? Do you spend quite a bit of time looking down at a screen? These repeated motions will soon lead to what is now being coined as tech neck. What is tech neck? It’s the horizontal wrinkles and lines that appear on the neck, due to you constantly bending your neck downwards. Of course, even if you don’t do this, you may still experience lines on your neck due to age. The skin here is much thinner and more delicate than people realize, meaning that it does not take long for it to become loose and wrinkled. This is where dermal fillers come in… They provide pretty much instant results to tech neck, plumping this area up and restoring its youthful appearance.

Dr. Sheffield will explain his techniques to the patient and lets them know about the type of anesthesia he will use. The location and type of facility is also covered. The patient is given the chance to learn about the costs and risks involved. This is the perfect time to ask any questions about the procedure as well. Here are the visible signs of aging that may say it’s time for a short scar facelift procedure: Nasolabial folds, jowls or marionette lines are present, There is an appearance of a double chin, There are deep creases and lines near and around your eyes and forehead, You have a saggy or “turkey” neck, There is loss of volume and a hollowness in the cheek region, Your jawline is lacking the definition you want, The disappearance of volume in the features around the mouth.

A healthy diet will always contribute a little or even a lot to the success and experience of your surgery. Eating healthy also contributes positively to your mental health. Having stable mental health going through a process that can be strenuous on the mind and body is essential. If you are a smoker, you should definitely consider either quitting or taking a break a month around the surgery. Smoking can slow down the healing process.

What are the benefits of this tumescent technique? This technique offers some benefits over older liposuction techniques, avoid the use of sedative drugs or general anesthesia, changing this for local anesthesia instead, and reducing the risk of bleeding even after the procedure due to the epinephrin application directly into the subcutaneous fat that will be removed. When was this technique developed? This tumescent technique was developed in 1985 by Dr. Jeffrey A. Klein, a dermatologist in California, and published two years later in the American Journal of Cosmetic Surgery. The first liposuction technique was developed in the late 70’s in Europe and could only be performed under general anesthesia, and blood loss was an issue. This led to Dr. Klein developing this technique where the downtime is minimal, there is no need for general surgery, and blood loss is kept to the minimum.

What’s the difference between a medical facial and a spa facial? The end goal—clear, beautiful healthy skin—is the same no matter what facial you get. But a medical facial, like the ones we offer, is much more powerful than anything you can get in a spa. The main reason: we use medical-grade skincare products that contain higher concentrations of active ingredients. This gives you more dramatic results. Day spa facials and a massage facial are often geared toward a more relaxing, pampering experience with added hand and foot massages, spa music, and aromatherapy, for example. The other benefit of medical facials: you can have other concerns treated by one of Dr. Sheffield’s staff after your facial. Specialty spa facials are generally for patients 30 years and old and are used as part of the facial rejuvenation anti aging process. Read even more details on https://sbaesthetics.com/medical-spa-santa-barbara/. Your face is precious after all and you will have with you for life, so before deciding on having the rhinoplasty procedure, you should definitely weigh your options, do your due diligence and be sure to ask your plastic surgeon plenty of questions to determine if this surgery is right for you. Your nose is the center of symmetry in your face and even subtle alternations can dramatically change your appearance. Expectations are a critical component when selecting candidacy. The best candidates have a desire to enhance the profile of the nose, but there is not a perfection obsession. The ideal candidate is a person who does not seek a rhinoplasty to make them a happy person, as they are already happy with their daily life and are simply seeking an enhancement to self-confidence and self-esteem. It’s important to be realistic in terms of goals for your rhinoplasty results and it is critical to discuss all of your expectations and concerns with Dr. Sheffield to ensure that the outcome is in line with the surgical possibilities.

Your desire is to look and feel your best, and in many instances, the surgical approach is not the right one as you need a small aesthetic boost to get you to where you want to be. At SB Aesthetics Medical Spa Santa Barbara, we provide the most cutting-edge non-surgical aesthetic procedures and treatments to assist with hair removal, tattoo removal, acne treatment, skin resurfacing, eliminating dark spots, smoothing away fine lines and folds, restoring volume loss, reshaping and enhancing, skin tightening, removing spider veins and many others. Each of our procedures has been proven to provide excellent results and we will provide you with a customized treatment plan to ensure the best possible outcome.

Lip Lines. A Botox injection can help reduce the vertical lines of the upper lip also known as smoker’s lines. Not many units are needed, but if too much is used, lip movement may be affected. Botox is effective at minimizing these lines. Vertical lip lines are generally a result of the regular and continuous lip movements of daily life. Often known as smoker’s lines, are a result of long term smoking and caused by the harmful effects of smoking but also from the repeated pressing and pursing of the lips together.

Rhinoplasty is a bit risky for heart patients. It all depends on the extent of your heart disease. If you have cardiovascular disease, you can have rhinoplasty without any worries under the supervision of your cardiologist. The nose is the focal point of our face, so having a beautiful nose will definitely be one of the reasons for feeling better and more confident in your appearance. Because your airway was probably just ”perfect,” any incremental reduction in it would cause airway obstruction. That is why it is important to be evaluated by a physician who is trained in otolaryngology, or a plastic surgeon who specializes in nasal surgery so that you can get a good-looking nose that functions well.

Botox doesn’t actually erase wrinkles. Since Botox is, of course, a treatment for wrinkles and fine lines, I initially figured a few injections would pull these unwanted imperfections right off my face. But as it turns out, for most patients, Botox is more preventative than restorative. Its active ingredient “freezes” facial muscles to keep you from contracting them in ways that deepen lines and wrinkles. “Any line that is present at rest, whether it is an etched in frown line, or a deep wrinkle, is not going to disappear with Botox. Botox is not an iron,” says medical, cosmetic, and surgical dermatologist Dr. Estee Williams, MD. Therefore, the earlier you get Botox, the more preventative its effects — hence the trend of getting Botox as early as your 20s. Read more details at https://sbaesthetics.com/.

By Health

Top Oxford welding supplies store right now in 2021

Best Oxford TIG welder online store today? Ireland market choice: Lincoln Electric is an Ohio-based company started all the way back in 1895. For over 120 years, Lincoln has produced some fine quality welders, and the Handy is certainly one of them. At about $300, this welder is a bargain while also offering great results. For around $200 dollars more than the $99 Goplus, users can expect an uptick in overall power and performance. As this Lincoln welder is well known for being both reliable and durable, welders who aren’t expecting an overabundance of power will love this machine. People who have purchased the Lincoln Electric K2185-1 Handy MIG welder remark that it is stable and long-lived even with daily use. The Handy Lincoln welder is able to weld mild steel from 24 gauge up to 1/8 inches thick. It has four output power settings that the user can dial in. The fan cooling system reduces the risk of it overheating.

Looking on the internet for the top Oxford Plasma cutter in Ireland? Metal Inert Gas (MIG) and flux core wire-feed welders have completely revolutionized small-scale welding over the last couple of decades. Whether it’s hobbyists needing welders for DIY projects or professionals that deal with sheet metal on a daily basis, the modern MIG delivers an amazing impact on productivity. With the huge influx of Chinese and other foreign-built products on the market, prices are hovering at all-time lows. The biggest problem might actually be narrowing the huge selection down to the right machine at the right price. A professional welder needs quality and reliability above all else, while a DIY guy at home might be most concerned over the actual price of putting a MIG in the garage. We’ve put together a list of what we think are some of the best MIG welders available today along with reviews to help you choose.

Delivery of parts to the welding station in an organized and logical fashion is also a way to reduce welding costs. For example, one company was manufacturing concrete mixing drums. In the fabrication process, the company produced 10 parts for one section, then went on to make 10 parts of another drum section, etc. As pieces came off the line, they were put onto the floor of the shop. When it was time to weld, the operator had to hunt for the pieces needed and sort through them. When the outside welding expert pointed out the amount of time being wasted in this process, the company started to batch each one on a cart. In this way, the pieces needed to weld one drum were stored together and could easily be moved to the welding area. This type of scenario is also true for companies that may outsource parts to a vendor. Though it may cost more to have parts delivered in batches, it may save more in time than having to organize and search through parts to be able to get to the welding stage. How many times each piece is handled in the shop may be an eye-opener to reducing wasted time. To measure such an intangible as this, operators are asked to put a soapstone mark on the piece each time it is touched – some companies are surprised to find out how many times a part is picked up, transported and laid down in the manufacturing process. In the case of one company, moving the welding shop closer to the heat treatment station eliminated four extra times that the part was handled. Basically, handling a part as few times as possible and creating a more efficient production line or work cell will reduce overall costs.

Our vision and our distinct set of values drive the success and spirit of our organization. At ESAB, under Colfax leadership, we live our values. As a premiere U.S. welding equipment manufacturer, our vision and values help us to make strategic decisions, allocate resources, and focus our choices every day, domestically and internationally. ESAB offers a world of products and solutions for virtually every welding and cutting process and application. We serve industries that serve the world. The Best Team Wins – Team-oriented, involved associates are our most valuable resource, and we are passionate about attracting, developing, and retaining the best talent. Living this value is done in three primary ways: 1. Building the right team – having the right people to do the job; 2. Creating the right environment – making sure that leaders create an environment where all associates can contribute, and 3. Getting the win – when you have the right people and right environment – it makes getting the win a lot easier!

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

A few tips on welding equipment, MIG and TIG welders, plasma cutters. A welder is a long term investment where many find that they get what they pay for. While it is sometimes advisable to test the waters with a used model, picking the right machine the first time around can save a lot of headaches and cash in the long term. No one wants a used welder to fail in the middle of a big job or to discover that a used welder’s price can help make ends meet but the welder itself can’t make two pieces of metal meet. The best welder will complete every project that comes down the pike and minimizes limitations. This means that the most expensive welder is not always the best for each situation. However, the cheapest welding machine that can’t handle every job a welder hopes to accomplish fails to pay for itself in ways that make it worthwhile to review the possible options before investing in a welder. The Work Determines the Welder One of the most important questions to consider when selecting a welder isn’t what projects it will be used for in the next week, month, or even year. Those interested in buying a welder need to ask if they see themselves using it more frequently in the future for many different kinds of projects.

GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.

The Hobart Handler 140 is an excellent choice for beginner welders, which is why it’s probably the most popular welder on the market. This thing is solidly built and is a step above many of the other 140A welders. The arc runs smooth and produces great results. It’s suitable for a range of general repair tasks and projects like trailer frames, autobody repair and anything up to 1/4 inch thick. If you’re just getting into welding, you can’t go wrong with this little machine! What’s better is that it’s an absolute steal at under $500. See the full review here.

MIG welders are divided into transformer and inverter models. Briefly, transformer machines feature only mechanical parts that can adjust the output voltage “sequentially” while the unit is off. The output voltage is not stabilised and may decrease under load. Still, a simple design is the main benefit of transformer welders that facilitate their maintenance. Also, they are often cheaper. Inverter MIG welders are fitted with electronics that allow a smooth voltage adjustment, so it isn’t susceptible to drops and does not fall under load. Of course, power is the main feature of any electric tool. As for MIG welders, their power depends on the maximum amperage, more usually, the output range. This range determines the unit’s field of application. Powerful models can be used on small construction sites or in repair shops, while less powerful models are usually used for private needs. For example, the welders of up to 200A are great for home use; the 300A models are suitable for small repair shops, and if you need a high output and continuous work, consider welders over 300A. Find more info at https://www.weldingsuppliesdirect.ie/.

For some people, the best MIG welder is one that they can take with them wherever their jobs might take them. Welding is one of the most in-demand talents in the UK at the moment, with plenty of manufacturers and mechanics on the hunt for flexible experts who can deliver state-of-the-art welds in a hurry. This MIG Welder portable inverter system comes with everything you need to take your talent with you on-the-go. The system is neatly contained within a compact and light-weight blue package, where you’ll find everything you need for a car welder or home welder, including an optional spool gun for aluminium welding, a 3M MIG torch, earth clamp and lead, and gas hose & regulator. There’s also an easy-to-follow manual included, and a 3-year warranty if you’re concerned about getting the most out of your investment. Overall, this welding machine, created by R-Tech is perfect for people who want to get the most out of a smooth and efficient MIG welding experience. It offers an all-in-one kit for professionals and beginners alike, although it seems to be designed more for the everyday welder than the hobbyist.

By Shopping