Coriolis mass flow meter manufacturer by bjssae.com: The most accurate flow meters are Coriolis mass flow meters. However, these are not appropriate for many applications because they are extremely expensive, usually large, and are complete overkill for most applications. There are several different types of mass flow meters, including Coriolis mass flow meters, thermal mass flow meters. Each type works in a slightly different way, but they all rely on the principle of measuring the mass of the fluid to determine the flow rate. Read additional info on coriolis flow meter manufacturers.
It is the existence of domestic brands that has forced the prices of foreign brands to drop by 1/2-2/3 in recent years. The production and R&D investment of natural gas turbine meter is relatively large, and the prices of enterprises with certain strength will also be higher in domestic brands. But even then, they are only about half the price of high-end international brands. Therefore, it is recommended that users choose carefully on the basis of comprehensive consideration of their respective use requirements and procurement costs. Don’t pursue low prices too much, nor do you need to pursue imported brands inappropriately.
Influence of humidity on measurement results when using vortex meter. The output of the vortex flowmeter is only proportional to the flow velocity of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the turbine flow meter is negligible, so it can be considered that the output of the turbine flow meter is entirely caused by the wet flow. Caused by the dry part of the steam. The density of the dry part, whether it is pressure compensation or temperature compensation, can be detected more accurately. The results of steam measurement are often used as the basis for economic settlement between the supply and demand sides. If the two parties agree to settle the fee according to the dry part of the steam and no charge for the condensed water, the impact of the phase change on the measurement is negligible and can be ignored.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.
Fork density meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density, and viscosity. Applications of micro motion fork density meter: Pipeline interface inspection, slurry solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Continuously measure pipelines in real-time through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Supports protocols connected to DCS, PLC and flow computers. Pass Hazardous Area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display. Discover additional details at https://www.bjssae.com/.
Inner software: For the inner software, we can even customize the inner software with your own company’s name and information. Standard color: If the ordering quantity is big , we can customize the color of the transmitters on the coriolis mass flow meters for you. The standard color is dark grey. We are providing the complete measuring solutions, not only one single unit of coriolis mass flow meter. Sometimes even though it is not the problem of our coriolis mass flow meters or thermal mass flow meter, we will still help you solve the problems.
When the vortex gas flow meter is installed behind the pressure reducing valve, the saturated steam suddenly decompresses greatly, the fluid expands adiabatically, the water droplets partially evaporate, and at the same time absorbs the heat of vaporization from the liquid and vapor phases, reducing the temperature of the vapor and liquid phases. If the temperature is not lowered much or the humidity is higher before evaporation, the temperature will quickly drop to the saturation temperature corresponding to the new pressure, and a new equilibrium will be established. At this time, the steam is still saturated steam. If the pressure drops a lot or the humidity before evaporation If the temperature is lower, the temperature is still higher than the saturation temperature corresponding to the new pressure due to the evaporation of water droplets, and the steam becomes superheated steam.