Day: May 22, 2019

Automotive hail repair tips

Automotive hail repair in Macungie, PA ? Dents near edges – If a dent of any size is situated near the very edge of a body panel or near a seam, PDR repair may be impossible. The reason for this is that in order to repair a dent using these techniques, you need to access the back side of the dent. The dent has a crease – If there is a sharp crease (like a folded page) in the dent, PDR likely will not work. Older vehicles – If your vehicle is older than 1990 or is a classic car, the odds are good that attempting paintless repair techniques on a dent will damage the paint. This is because the paint quality on older body panels can’t withstand the strain of the repair techniques.

A good paintless dent repair might look perfect, or close to it,but the metal underneath that shiny paint is still damaged. It’s thinned out and its structure has been weakened. But as long as the paint is still there and it’s not immediately obvious, that’s probably good enough. After all, it’s not a safety concern or anything. Just remember: Sometimes it really pays to hire a pro. To DIY or not to DIY? I’ve never tried to use an at-home paintless dent removal kit to bang one out myself; however, I have owned a car that I had completely repainted because paintless dent removal wasn’t an option. And it’s a pain in the butt. And it’s expensive. And I’ve also made some bad calls in terms of judging what I can handle myself … and what I’d just make worse. That said, I’ve never bought a product from an infomercial to attempt a car repair.

Not only can you unclog a drain with a plunger, but you can also get out small- to medium-sized dents out of your car too. Just splash some water on both the plunger and the dent and start pushing and pulling until it pops out. Make sure to use a cup plunger (for sinks), not a flange one (for toilets). Reversing into an object is one of the easiest ways to get a dent. So for plastic bumpers, even if you attempt to take off the bumper, it might still be difficult to push out the dent because of how stiff the plastic is. Solve this issue by boiling some water in a pot and throwing it on the dent.

If you can not expose your car to the sunlight, you can use a hair dryer instead. Just aim the hair dryer to the areas you want to fix, and wait until the dents even out. The ideal distance between the hair dryer and the car should be 2-4 inches. While using a hair dryer, there should be an interval of 2 minutes. If the car’s paint starts discoloring, you should stop applying heat right away. Use a rubbing compound or wax to revise the paint color.

This technique is popular among automotive enthusiasts when it comes to the removal of small dents. The idea is simple: heat will inevitably cause the metal surface to expand and (hopefully) pop the dent out. Remember that the more time the car spends time under the sun, the better this technique will work. Use a plastic and/or leather conditioner for the car’s interior, so as to not damage it while exposing the car to maximum sunlight. If the sun’s heat isn’t particularly strong that day, a simple hair dryer could be used in conjunction with the sun to concentrate the heat to a specific area. Point the hair dryer to the dented area for two-minute intervals until the dent pops out. Be careful not to touch the hot lip of the hair dryer on any painted surface. A two-to-four inch gap between the dryer and the surface is recommended. See extra details at We fix every aspect of your hail damage.

By Business

Stump removal advices

Do you want to keep your trees in good shape? First we will suggest some tips on tree care and after that we will introduce Tree Artisans, a tree services company in Colorado Springs.

Proper pruning technique is important for a healthy tree. Please review our animated Tree Pruning Guide as well as videos on why pruning is necessary, the rules of pruning, and the ABCs of pruning. This depends to a large extent on why you prune. Light pruning and the removal of dead wood can be done anytime. Otherwise, below are some guidelines for the different seasons. Keep in mind, however, that individual species may. Pruning during dormancy is the most common practice. It results in a vigorous burst of new growth in the spring and should be used if that is the desired effect. It is usually best to wait until the coldest part of winter has passed.

Many people wait until spring to begin thinking about their landscaping, but the pros know that getting a head start in the fall can make springtime care easier and more rewarding. There are a few important steps to take when preparing your trees for colder weather. Nip problems in the bud by practicing the PINE method: prune, inspect, nourish and extend. Remember that healthy, well cared for trees generally don’t die, snap, lose limbs, or house termites. Keeping your trees healthy can help prevent damage to your home and property.

Tree owners often need to move or transplant trees from a nursery or within the yard. Yard trees may have been planted too thickly or threaten to outgrow available space. Size is a critical factor in transplanting. The larger a tree, the more difficult it is to transplant. Before starting a mulching project, become familiar the critical root zone (CRZ) or tree protection zone. This zone is generally defined as the area under a tree and out to its dripline. Improving conditions in this protection zone will also result in major health benefits to a tree.

Trust our skilled and certified arborists to remove trees from your landscape safely and efficiently. We limit the impact of our labors on other vegetation and clean up any debris. Local, family-owned and operated by the father-and-son team of Jack and Clay Webb, Tree Artisans offers reliable, timely tree care. We are members of the International Society of Arboriculture and the Tree Care Industry Association. Licensed and insured to operate in Colorado, we are based in Colorado Springs. Our services extend anywhere along the Front Range, and we can quickly service El Paso, Teller, and Douglas. Read extra details at Best Tree Services In Colorado Springs.

Lower branches may need to be pruned for similar reasons. Known as raising, this process can be used to increase the amount of light for turfgrass and groundcover beneath the tree’s crown. Our arborists are trained to evaluate the condition of your trees and determine the type(s) of pruning required to balance your goals and those of managing plant health and safety.

Most deciduous species of trees are at risk if stressed by insect defoliation, weather, poor soil conditions, or other factors. One of the best things you can do is simply to keep your trees healthy with regular maintenance including proper irrigation and mulch, fertilization, and removal of dead wood. Healthy trees are better able to withstand an infestation. Once the damage is obvious, it’s probably too late to treat effectively for optimal protection. Be sure to inspect your trees for any signs of infestation in early spring. For more information call Tree Artisans at 719-822-6733.

By Home